Our DIY Kitchen: Before, During, & After

Before we get started, I want to be completely honest with you: I did not start out intending to do the kitchen update ourselves. While I'm fairly confident in my DIY skills, my experience is mostly in furniture restoration and other smaller, less permanent projects. Because the kitchen is such a huge focal point in our open-concept home (and very much a permanent fixture), I was willing - and even planning - to have it done professionally.

We made an appointment and had a local company come out to give us an estimate, and the experience left A LOT to be desired. The guy spent the entire meeting trying to sell me things I didn't want or need, and when I finally got the estimate from him (4 days later), there was no explanation of the work it would cover. Just a number. A very large number. And I'd done my research, so I had a general idea of what the professional updates I wanted would cost. But $17,000 for a kitchen the size of ours? HA! So, I decided to do it myself. 

a few of my favorite inspirations from pinterest

Instead of $17,000, we put in a lot of work and spent just $2,125! (And only $2,900 with upgraded appliances!) A tiny fraction of the price and I got every single thing I wanted. When it was all said and done, we had replaced the countertops, installed a new sink and faucet, painted the cabinets, replaced all the hardware, put up a new backsplash, and replaced the stove and microwave. It took us roughly two weeks, but that included a few days of wait time for the appliances and a few days that we were out of town for a wedding and busy with other things. If we had nothing going on and had planned a project timeline in advance, we probably could have done it all in a week. But why rush? Who needs a functioning kitchen and working plumbing when there's Chinese takeout to be had?

If you're looking to do some kitchen updates of your own, or if you're just curious about the process, I've broken each project down below and included the online tutorials I used, a few of my own tips, lots of messy renovation iPhone pics, and a list of materials needed for each project. Here we go!


We started our kitchen update with new countertops for two reasons: 

  1. I knew I wanted to have the old ones removed before painting to avoid any damage to the paint job.
  2. I also knew that our granite slab would be a focal point, and would influence our choices for the rest of the kitchen.

We found our granite company by complete accident, after following Google Maps to not one, but TWO, non-existent granite companies. Two annoyed homeowners and one wrong turn later, we stumbled across Royal Granite, and pulled in to take a look.

We walked in with no appointment, no firm idea on what we wanted, and a rough sketch of our kitchen (thank GOD I'd thought to bring some measurements with me), and they took the best care of us. Albert, the manager there, immediately sat us down, discussed our plans, and then took us outside to see some slabs. He was incredibly helpful, never tried to sell us anything but what we told him we were looking for, and even offered to let us do our own removal to save a little money (which we opted out of, and it was the best $80 I ever spent). We ended up picking a couple remnant slabs that fit our small kitchen perfectly and saved us a little money!

We knew we'd be ditching our sink for an under-mount one, and decided to go with a single basin sink for better versatility (think large pots & baking sheets). We picked out this single-hole faucet, and I LOVE its pull-down nozzle and flat-spray feature. And, my handy husband saved us even more money buy reconnecting the sink/garbage disposal and installing the new faucet himself!

MATERIALS:
Countertops and sink basin (+ professional installation/removal) - $1400
Garbage disposal mount + wrench - $21
Garbage disposal mounting collar - $10
Faucet - $165
Plumbing pieces - $10

TOTAL: $1606


In the weeks before we started work on the kitchen, before touching anything, I read every article I could find online about painting kitchen cabinets, especially ones about oak cabinets in particular. My top three DIY posts (which I kept pulled up on my laptop to reference throughout the painting process) are by Practically Spoiled, Lauren McBride, and Little Dekonings. This post from This Old House is also a good one.

While painting the cabinet boxes had to wait until after the new countertops were installed, there was a lot I could get started on right away. I removed the old knobs and put wood filler in the holes. Then, I used painter's tape to number each cabinet door and drawer, to make sure I could put it all back together properly. I then got out some ziplock bags and labeled them to match the doors, and got to work dismantling! Each door's hinges went into the matching ziplock bag, which I stashed off to the side for later. 

I set up a work area in the garage and moved all the doors and drawers out there. I cleaned each one, scraped off the old bumpers, sanded, deglossed, and then laid them on a drop cloth on top of their label. Instead of buying painter's triangles, I took the money-saving route and used canned food covered in dish towels. The cans lifted the cabinet doors of the floor so I could paint the edges, and the towels kept the cans from leaving marks on the dried paint job. Starting with the back sides, each piece got two coats of primer (front and back), three coats of paint, and three coats of sealer. We used leftover paint from when we moved in, and since we were saving so much by doing the painting myself, I felt better about getting a more expensive sealer. I went with this recommendation from one of the tutorials I read; it has great reviews and since these cabinets get a lot of use, I felt it was worth the extra price for extra protection. 

Back inside, I emptied the contents of our cabinets into the living room. After the countertops were removed and replaced, I covered them with paper to protect from drips and got to work on the boxes.

Just like the doors, the cabinet boxes were cleaned, sanded, deglossed, and primed. After the first coat of primer, I noticed that the white color was making every gap in the woodwork very noticeable, so I used the wood filler again to seal up the seam where the moulding was attached to the cabinets. Before on the left, after on the right:

UNADJUSTEDNONRAW_thumb_7e4a.jpg
UNADJUSTEDNONRAW_thumb_7e4d.jpg

The cabinets then got another coat of primer, three coats of paint, and three coats of sealer. After drying for a day or so, I reassembled! The final (and arguably most important) step was to add new bumpers to all the doors and drawers. Gotta protect all that hard work! This was the first look at our vision coming together, and we were thrilled. SO satisfying. Goodbye forever, orange oak!

MATERIALS:
Screw driver
Ziploc baggies
Painter's tape
Marker
Plastic wood filler - $6
Cleaning solution + paper towels
Sandpaper
Deglosser + rag - $7
Painter's triangles (or substitutes)
Mini foam rollers - $9
Small paint brush
Water-based primer - $9
White paint
Sealer - $33 for a quart
Staining pads - $4
Door bumpers - $5

TOTAL: $73


At this point, the holes from the previous hardware have been filled and painted over, so all we have to worry about is drilling new holes for the new hardware. Easy, right? Wrong. 

I briefly considered leaving the cabinet doors without hardware, mostly out of hesitance to drill holes in my freshly (and painstakingly) painted cabinets, but 1- I felt leaving them bare made the cabinets look a little unfinished, and 2- I thought having handles to grasp instead of touching the cabinets themselves when opening a door would protect and prolong the life of the paint job. 

First, we had to pick out hardware. That part actually WAS easy; I'd had my eye on this style bar pull for a while. They're a little modern and a little classic, which wouldn't clash with the style of the cabinet doors (and those were NOT being replaced, because $$$). I'm sure I could have saved a few more dollars by getting pulls somewhere online like Build.com, but I was in an instant-gratification mood and Home Depot had them in stock :) Plus, I wanted to bring home a couple different sizes to see what I liked best before committing to buying all 16 of them. 

Before installing, I determined the placement I wanted, a combination of this and this, and made some cardboard templates. If we ever do this again, I'd opt for a more sturdy wooden rig, something like this that holds itself in place. 

Now, this step in the process is where we first encountered what I consider to be a true renovation moment. You know, like the ones you see on HGTV when the couples are working together, and then something goes wrong, and the wife's voice starts to get louder and more shrill, and the husband is trying to argue that the mistake isn't a big deal, but it IS A BIG DEAL, JOHN, IT'S A HUGE DEAL AND EVERYTHING IS RUINED AND MAYBE THIS WAS ALL A MISTAKE. Thankfully for us, our moment was significantly less dramatic (probably due to the lack of a camera crew or team of editors looking to draw better ratings) and was easily solved, but I have to say, our marriage was tested that day. 

What was the problem, you ask? It was a door handle. A noticeably not-level door handle. To me, someone who had just spent the last week of her life working strenuously on painting the cabinets perfectly, the idea of having to plug yet another unwanted hole, sand it down, and then prime, paint, and seal all over again was just enough to make my voice do the shrill wife thing and my eyeballs come as close as possible to popping right out of their proper holes. But, good husband that I have, J sat me down in front of an episode of Elementary and set to work fixing it, no wood filler or repainting required. Crisis averted. 

This is where I felt like we hit true "new kitchen" status. The hardware made the kitchen look more finished (even though it wasn't) and really pulled everything together.

MATERIALS:
Cardboard template
Marker
Drill
Level
Hardware - $19 per four

TOTAL: $76


I love our backsplash. I love it so much. But listen to me when I say DO NOT GET A GLASS TILE BACKSPLASH. DO. NOT

When we went to Floor & Decor to pick out our tile, we fell in love with the gray subway tile in a shower display. Neither of us originally wanted subway tile, but the gray color and shine from the glass made it stand out, and we liked how it brought together the white cabinets and the granite.

When it came time to install, we headed to Floor & Decor to pick up the tiles, and a super helpful employee helped us make sure we got all the supplies we'd need (spoiler: it's more stuff than you think). We stopped at Home Depot to rent a wet saw and grab a few extra supplies, then headed home to get to work.

Except not. Because the tiles were chipping and cracking like mad. 

Upon further googling, we discovered that you apparently cannot use the same saw blade for glass tile that you would for ceramic. Because of course. So, back to Home Depot for a diamond saw blade. You heard me. Diamond.

After that, things went much more smoothly (no pun intended, but I like it). It was easier than I thought it'd be, especially with only this video for training. I actually rather enjoyed the work, although I had the much easier job of spreading mortar and laying tiles while J had the more high-stakes task of working the wet saw. 10 hours later, we had mortar in our hair! Oh, and a backsplash!

And that was the end of the problems, right? Wrong again. Towards the end of the wall, we probably should have remixed the mortar, but we pushed through. And two days later, when we took out the spacers, there were a few casualties. RIP. Thankfully, none of the tile actually broke, so we didn't have to cut any new ones. But I DID have to spend the better part of an hour grinding the dried mortar off the wall and applying tile repair mortar.

After that had a few hours to dry, it was grout time. I did this alone on my day off while J was at work, and it was a piece of cake.

After that had a day to dry, I went back and caulked the seam where the tile meets the countertop, as well as all the "raw" edges (where the tile ends without meeting a wall). When it came time to put the outlet covers back on, I found a few tile cuts around the outlets that were a little imperfect, but easily fixed. We used outlet spacers for where the tile was cut a little too far away from the outlet, and a diamond file for where the tile covered up the screw hole for the outlet cover.

While painting the cabinets wins the award for longest kitchen project, the backsplash was by far the most work. But, it's also the one we're proudest of, and I love that it's one we worked on together.

MATERIALS:
Glass subway tile in Pure Wool - $1.49 per piece
Mortar - $15 per bag
Mortar spreader (aka trowel) - $2
Tile repair mortar (optional, for dummies like me) - $7
Grout - $12 per bag
Grout sealer - $25
Grout spreader - $2
1/16" spacers - $15 for 500
Mixing attachment for drill - $8
Sponges - $5
Tile nippers - $13
Outlet spacers - $3
Diamond file - $16
Diamond saw blade - $11
Tile edging (to hold up tile behind the stove) - $13
Caulk - $4
Painter's tape
Buckets

TOTAL: $370

We were originally going to wait a bit to replace appliances, but with all the times we were in Home Depot during this kitchen update, we noticed an amazing sale we couldn't pass up. Plus, both of us were sick to death of trying to clean the stupid coils on our old stove, and our microwave had been missing its plate since we moved in.

Plus, something about shiny new stainless steel really makes this feel like a brand new space. I can't believe it's ours!

MATERIALS:
Samsung microwave (+ professional installation/removal) - $168
Samsung stove (+professional installation/removal) - $598

TOTAL: $766


And there you have it! There is nothing more satisfying than working hard and loving the results. Up next: light fixtures! Good design never sleeps..

Our (Mostly) DIY Kitchen Update

I loved our house from the moment we first walked in. I also hated the kitchen from the moment we first walked in. Orange builder-grade oak cabinets, laminate countertops, fluorescent lighting, and lime green walls. SO. MUCH. GREEN. But, I still loved it and saw so much potential, and immediately started planning an update. A few weeks ago we finally began the project, and now, eight months after moving in, we have a new kitchen!

It all started with the countertops. We found some remnant slabs we loved, and they fit perfectly in our small kitchen and saved us some money. After the countertops and the new sink were installed, I spent about a week and a half cleaning, sanding, priming, and painting the cabinets. Jason drilled new holes and installed the new hardware and the sink faucet, and then we installed the new backsplash together. (A word of advice: don't choose a glass tile. Just don't.) A new stove and microwave were delivered yesterday, and after a few weeks of blood, sweat, and tears later and we have a brighter, more beautiful space! It really changes the look of the whole downstairs space. I am so proud of the work we put in, and I love how it turned out. Scroll through for some photos of the new space!

THE BEFORE, on the day we decided to make an offer on the house:

THE AFTER:

IMG_4566a.jpg

look for less: office space

It may be because I have my own mini home office redesign on the brain, but it seems that gorgeous, chic work spaces are everywhere I look lately (case in point: this article, this article, and this pinterest board). I pinned some really great office spaces on my own interiors board this week, so I decided to pick a few of my favorites to recreate for you! Below I've shown you how to get a room that looks pretttttttty close to the photo. And, because you know I'm always looking for a deal, I've also put together a room with a similar look, but for a lot less.

office space #1

 office

office

 office2

office2

"get the look" room total: $1,071 shelves | desk | chair | rug | lamp | mirror | tree | lavender
"look for less" room total: $358 shelves | deskchair | rug | lamp | mirror | tree | lavender

office space #2

 office3

office3

 office4

office4

"get the look" room total: $4,744 lamp | shade | art | desk | shelf | rug | chair
"look for less" room total: $1,058 lamp | shade | art | desk | pull & brackets | shelf | gold leaf | rug | chair

office space #3

 office5

office5

 office6

office6

"get the look" room total: $981 fig tree | desk | chair | rug | pendant | vase
"look for less" room total: $676 topiary tree | desk | chair | rug | pendant | vase

Which look is your favorite, or have you spotted another office space you're crushing on? Share it with me below!

xo Korin

Dining Chair Inspiration

Remember those chairs I told you I was fixing up for my dining room? I know I promised a DIY post, and I haven't forgotten, but this isn't it. We had a couple of rainy weekends last month and, since I can't safely use paint stripper or spray paint inside my apartment, I had to wait it out. But I'm getting there! I've scrubbed all of the chairs and soaked the rust off the hardware, completely stripped the stain off one chair (it's a long process with all the little nooks and crannies in those babies), put one coat of paint on said chair, and picked out the fabric to re-upholster the cushions in. See, progress! Here's the chair mid-painting:

photo

Gorgeous, right? I'm thinking a turquoise/aqua vinyl for the cushion like these from Little Green Notebook (although I'm still toying with the idea of a printed fabric).

IMG_9777

I've been documenting my entire process and I promise to have a detailed post up when I'm done, in case you want to attempt something similar. In the meantime, here are some of the images that inspired me while shopping for chairs of my own (click through for links).

252412754087912851

252412754089624646

252412754089497915

252412754089208783

252412754089107800

If you want more DIY inspiration, head over to Little Green Notebook—my go-to for design ideas. Redoing your own items? Share them below!

Colored Matte DIY

I found this idea while browsing Pinterest one day (the way most ideas are found), and I've wanted to try my own DIY version ever since. My apartment has wonderfully high ceilings, which is amazing for making the space seem larger and brighter. But, without anything hanging up, that means there are massive stretches of empty wall staring at me every day. I bought three of these frames last summer for my living room and filled them with a beautiful patterned wrapping paper, but the colors didn't go with what I have in mind for my new space, so I decided to try DIYing some colored mattes for artwork. I actually did this project a week or two ago, but it wasn't until recently that I managed to remember to buy command strips to hang them up. Woops!

photo 7 (1)

With some art finally up on the walls, my living room is a little closer to being completed! Ignore the shade-less lamps and the mismatched pillows...like I said, almost done. If you're interested in making some of these for your space, read on! I'll tell you everything you need to know about making your own (inexpensive) colored mattes.

CraftProject

Aside from that list, you'll also need frames and artwork, but that's a given. I got my frames from Ikea and found the sketches online (aren't they awesome?). To save some money, I used poster board instead of buying matte board—I got a pack of 10 for $3 at Hobby Lobby. You can save a step in the process by buying colored poster board, but I wanted a very specific color so I went with white.

I used scissors to trim the edges of the poster board to fit the frames, and then I measured the artwork to determine what size hole I would need. I measured the tallest and widest parts of each sketch, and used the largest of those measurements. This ensured that all the mattes would look uniform, while also making sure that no part of any of the sketches would get cut off. Cutting out the holes in each matte was a little tricky. To make sure they were centered, I took the width of the poster board, subtracted the width of the hole I wanted, and then divided that by two. This gave me the distance from the edge of the pister board to the hole. I then measured out that distance at several points on the poster board, and then used the ruler to connect the points with a straight line. I did this on both sides, and then again for the top and bottom. After I had all the lines drawn, I used an Xacto knife and mat to cut out the centers.

Next step: paint. Spray paint would be ideal for this, but again, I wanted a very specific color that wasn't available in a spray can. So instead, I chose the color swatch I wanted and got a $3 paint sample from Home Depot (and had plenty left over). To avoid brush strokes, I used a small foam roller and paint tray (I actually just used a paint tray liner, they're sturdy enough to be used alone, can be rinsed out and reused multiple times, and cost less than $1! Score).CraftProject1

I planned to do this out on my patio, but the wind kept blowing my papers around so I moved the party indoors. I keep a box full of the billion newspaper ads I get in the mail just for projects like this. I covered part of my living floor with several layers of the papers (at this point I had not yet gotten my dining room table) and got to work. It took several layers of paint to get a uniform look; you can kind of tell in the photo on the right (above) how splotchy it looked at first.

photo 5 (1)

After letting them dry for a day, I positioned the prints, taped them to the mattes, and framed them. Tada! New colorful pieces to brighten up my walls. Let me know if you decide to try this, I'd love to see how yours turn out!